Is Category 2 Water Dangerous?
9/26/2019 (Permalink)
How To Handle Water 2 Category Water In Your Building
If you’ve discovered you have a flooded building on your hands in Waterloo, OK, you might feel overwhelmed figuring out the appropriate next steps. Before entering the building yourself and trying to start a water pipe repair or address any other damage, you will need to make sure that the water is safe to come in contact with. If dealing with Category 2 water damage, there are potential risks you should be aware of as you proceed. Here is some useful information you should know on how to handle Category 2 water in your building.
How To Identify Category 2 Water Damage
While clean water that comes from a known source such as a broken pipe or water line is considered Category 1 water, Category 2 water, or “gray water”, is water that is contaminated by bacteria and viruses and can potentially cause illness. This type of water can come from the following sources:
- Discharge from appliances such as the dishwasher or washing machine
- Overflowing toilet water that may contain urine but no feces
- Sump pump failures
- Clean water, such as water from a water pipe repair, that sits for an extended period of time
- Water that rises to a higher level and comes into contact with building materials.
How To Address Category 2 Water
When dealing with any type of flooding, it is always appropriate to get in contact with a water damage restoration company. This is especially true when dealing with Category 2 water since people can possibly get sick from touching the water. Always act as quickly as possible since Category 2 water can turn into Category 3 water damage, or black water, if not cleaned up right away.
Knowing when you have category 2 water damage on your hands is very useful for keeping everyone in your building safe. Always get help, even if dealing with a clean water source such as a necessary water pipe repair, to avoid further damage or harm to people nearby.