Getting Ahead of Mold Damage After a Flood
Did you know that within 24 to 48 hours, mold can begin to grow in flood-affected areas? Mold growth happens disastrously quick when there is standing water, and even without mold, you have to worry about the proliferation of bacteria in standing water and gray water. To get ahead of mold damage, you need to have a reactive, responsive plan for restoring your commercial building in Edmond, OK.
1. Move Fast
Don’t delay cleaning up after a flood. Particularly, don’t delay cleaning up any water. Mold growth is dependent on water, and without moisture, it will have nothing to feed on. Make water removal your first step in your cleanup plan, and initiate removal as soon as your property is safe to enter.
2. Be Aggressive
You may be tempted to try milder methods, wait, and then try something more aggressive. By that time, mold has already had a chance to set in and will be even harder to get rid of. Use the most effective methods first rather than trying for something softer. As long as you aren’t damaging the interiors of your property, you’re better off going in with stronger cleansers and cleaning equipment.
3. Be Thorough
Don’t leave a single corner untouched. Nooks and crevices are places where mold thrives, and where undetected moisture can make a perfect place for mold to begin growing out of the sunlight. Check every last crack to ensure you aren’t leaving any untouched hidden areas that may lead to problems.
4. Be Safe
No matter how worried you are about mold growth, be safe when handling your flood restoration and cleaning. If you don’t trust yourself to handle the equipment and chemicals needed to appropriately siphon away water and eliminate mold, contact professionals or enlist help from others. Always make sure to work in a well-ventilated place, wear protective gear, and avoid contact with hazardous substances, black water, sharp edges, or exposed electrical wires. Visit http://www.SERVPROedmond.com for more information on commercial storm damage.